Fiat Punto 2004 Скачать руководство пользователя страница 481

Страница: 481 / 533

ELECTRIC

SYSTEM

FIAT PUNTO TRAINING OUTLINE

Fiat Auto S.p.A.

After Sales Training

Fog lights

The fog lights can be switched on by pressing the ‘fog light’ button only if the dimmers have

already been switched on. They can be switched off if the same button is pressed again or the

dimmers are switched off.

Switching the dimmers on again will not involve switching the fog lights on again. The trip

computer will also actuate the indication on the panel.

When the fog lights are ON, switching to key-OFF will cause the fog lights to be turned off.

Upon the following key-ON, the fog lights will remain OFF: they can be switched on again by

pressing the button.

With both the panel and the fog lights ON, starting the vehicle will not cause the fog light

control to be reset.

License plate lights

The two external license plate lights are switched on when the driver requests that either the

dimmers or the parking lights are switched on.

The diagnosis is also carried out for every single license plate light (with the actuating control

ON), followed by the “license plate light failure” indication (if any) on the instrument board (with

the key ON).

When the rear fog light is switched on, the respective indication will appear on the panel.

Rear fog lights

The rear fog light can be switched on by pressing the ‘rear fog light’ button only if either the

low-beam headlights or the fog lights (with only the dimmers ON) have already been switched

on. It can be switched off by pressing the same button again, or if the low-beam headlights or

the fog lights (with only the dimmers ON) are switched off.

If the rear fog light has been switched off through the low-beam headlights or the fog lights,

switching the low-beam headlights or fog lights on again will not involve switching the rear fog

light on again. They can be switched on again by pressing the button.

gb Fiat Grande Punto OK

480 / 532

Turning the vehicle off (key-OFF) with the rear fog light ON will cause the latter to be switched

on. Upon the following key-ON, the rear fog lights will remain OFF.

Содержание Punto 2004

































































































































































































































































































































































































































































































































Результаты поиска

Содержание Punto 2004

Отзывы:

Похожие инструкции для Punto 2004

Бренды по названию

Популярные бренды

Fiat Punto 2004, Руководство по обучению

Результаты поиска

Содержание Punto 2004

Отзывы:

Похожие инструкции для Punto 2004

Бренды по названию

Популярные бренды