Fiat Punto 2004 Скачать руководство пользователя страница 463

Страница: 463 / 533

ELECTRIC

SYSTEM

FIAT PUNTO TRAINING OUTLINE

Fiat Auto S.p.A.

After Sales Training

System components

Mechanic key

The mechanic key is used to get on the vehicle and lock/unlock the driver’s and passenger’s

doors. It features a coded, mechanic insert matched with the driver’s and passenger’s front

lock latches. This insert can be removed from the key head upon utilization.

The latch on the driver’s door, fitted onto the handle, allows you to unlock all the doors by

means of the mechanic key, whereas the latch on the passenger’s door, fitted onto the handle,

allows you to unlock the single passenger’s door.

The key’s metal part (

) is fixed.

Key equipped with remote control.

This key consists of a fold-away metal insert (A) and a handle enclosing the same. The metal

insert can be removed by pressing the special button (B) on the handle, and can be fitted back

into place by keeping the same button depressed and rotate the metal insert in the handle until

the locking click (which indicates correct locking) is heard.

The key actuates the starting device and the front door locks.

gb Fiat Grande Punto OK

462 / 532

Содержание Punto 2004

































































































































































































































































































































































































































































































































Результаты поиска

Содержание Punto 2004

Отзывы:

Похожие инструкции для Punto 2004

Бренды по названию

Популярные бренды

Fiat Punto 2004, Руководство по обучению

Результаты поиска

Содержание Punto 2004

Отзывы:

Похожие инструкции для Punto 2004

Бренды по названию

Популярные бренды