Fiat Punto 2004 Скачать руководство пользователя страница 502

Страница: 502 / 533

ELECTRIC

SYSTEM

FIAT PUNTO TRAINING OUTLINE

Fiat Auto S.p.A.

After Sales Training

Side protection system.

Front side airbags:

they are of the thorax/pelvis type and ensure, together with the door

panels, the protection of critical body parts such as the ribs, abdomen and pelvis. They are

fitted to the seat so as to always ensure the maximum efficiency depending on the seat

position.

Front side thorax/pelvis airbags (“side bags”) (where

available).

They consist of two types of instantly inflating cushions

housed in the seat backs, which are used to protect the

occupant’s thorax and pelvis in case of medium-to-high

seriousness side collision.

Curtain airbags:

they are actuated together with the side airbags (where available) and

interpose themselves between the occupant and the vehicle exterior, thus preventing the

occupant’s head from hitting highly intruding objects. The curtain airbags protect both the front

and rear passengers since they range from the front pillar to the luggage compartment.

Side head protection airbags (“window bags”) (where

available).

They consist of two “curtain” cushions housed in the side

roof panel coverings and coated with special trimmings.

They are used to protect the front and rear occupants’

heads in case of side collisions, thanks to the wide deployment surface of the cushions.

gb Fiat Grande Punto OK

501 / 532

Содержание Punto 2004

































































































































































































































































































































































































































































































































Результаты поиска

Содержание Punto 2004

Отзывы:

Похожие инструкции для Punto 2004

Бренды по названию

Популярные бренды

Fiat Punto 2004, Руководство по обучению

Результаты поиска

Содержание Punto 2004

Отзывы:

Похожие инструкции для Punto 2004

Бренды по названию

Популярные бренды