5-27
MLC 52 Series MediaLink Controller • Serial Communication
Mute On button selected on IR 452 diagram
When you select the button, the following also occurs on the screen:
•
The Button field in the upper-left corner of the tab displays IR 452,
followed by the name/function of the button that was selected. In the
previous example, this field contains “IR452-DISPLAY MUTE.”
•
Like the MLC 52 buttons, each button on the virtual remote has four
memory blocks. The CMD radio buttons at the top of the tab (Cmd 1
through Cmd 4) also represent the memory blocks for the remote
buttons. The radio button for the memory block you are currently
programming is selected.
•
Switch Mode and Actions buttons are displayed in a column down the
center of the tab.
3
.
In the Actions section, click the Pick IR Driver Functions or the Pick 232
Driver Functs button, depending on the type of command you want to store.
In the following example, an IR command will be added.
Pick IR Driver Functions button on Controller (MLC) Config. tab
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203