3-5
MLC 52 Series MediaLink Controller • Operation
The following transfers are allowed:
•
From an RS model to another RS model
•
From an IR model to another IR model
•
From an IR model to an RS model
To transmit configuration data via IR, both the transferring and the receiving MLCs
must be free of the wall, electrical box, or furniture, and both must be powered on.
The MLC that is already configured can be powered by an external power supply,
or it can share a power supply with the unit that will be configured.
The MLC 52 IR VC and the MLC 52 RS VC use the same IR data transfer
procedure.
1
.
On the MLC from which the configuration will be transferred
(the donor unit), set
all
configuration switches to
off
.
2
.
On the MLC that will receive the data, set switch #
2
to
on
and
all other switches
to
off
.
3
.
Position the two units so that the IR Transmit and Receive LEDs of both MLCs
are facing each other, and no more than 6 inches apart.
1
1
2
3
4
E
ON
2 3 4
Tx
IR OUT
GND
IR IN
GND
+ 12V
1
1
2
3
4
E
ON
2
3
4
Tx
IR OUT
GND
IR IN
GND
+ 12V
Less Than 6”
IR Beaming
Transmitting MLC
Receiving MLC
1
ON
2 3 4
1
ON
2 3 4
Setting up donor and receiver units for wireless data transfer
Transmitting MLC
1
ON
2 3 4
Receiving MLC
1
ON
2 3 4
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203