Serial Communication, cont’d
MLC 52 Series MediaLink Controller • Serial Communication
5-18
Removing commands from a button
You can remove either one command from a button, or all the button’s commands
at once.
1
.
Select the button from which you want to remove commands. The button
becomes yellow.
2
.
If you want to remove only one command, select the Cmd radio button for
the memory block containing the command to be removed.
If you want to remove all the commands, you do not need to select a Cmd
radio button.
3
.
Under Remove IR/232 Codes in the Actions field, click one of the following
buttons:
•
One Command
— Removes the command only from the selected
memory block.
If you want to remove only one command at a time, you must
remove the commands in descending order; e.g., remove
command 4 before removing commands 3, 2, and 1.
•
All Commands in Button
— Removes all the commands from all the
memory blocks on the button.
Remove IR/232 Codes buttons
A prompt window like the following appears:
Confirmation prompt for removing one command
4
.
Click OK. The specified command(s) are removed from the selected button.
On the screen, the red or green field is removed from around the Cmd radio
button(s).
im Vertrieb von
CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203