Extreme Networks ExtremeWare XOS 11.0, Справочник по командам

Страница: 319 / 970

configure log filter events match
ExtremeWare XOS 11.0 Command Reference Guide 319
Example
By default, all log targets are associated with the built-in filter, DefaultFilter . Therefore, the most
straightforward way to send additional messages to a log target is to modify DefaultFilter . In the
following example, the command modifies the built-in filter to allow incidents in the STP component,
and all subcomponents of STP , of severity critical, error, warning, notice and info. For any of these
events containing a physical port number as a match parameter, limit the incidents to only those
occurring on physical ports 3, 4 and 5 on slot 1, and all ports on slot 2:
configure log filter DefaultFilter add events stp severity info match ports 1:3-1:5,
2:*
If desired, issue the
unconfigure log DefaultFilter
command to restore the DefaultFilter back to its
original configuration.
History
This command was first available in ExtremeWare XOS 10.1.