Extreme Networks ExtremeWare XOS 11.0, Справочник по командам

Страница: 317 / 970

configure log filter events match
ExtremeWare XOS 11.0 Command Reference Guide 317
configure log filter events match
configure log filter <name> [add | delete] {exclude} events
[<event-condition> | [all | <event-component>] {severity <severity>
{only}}] [match | strict-match] <type> <value>
Description
Configures a log filter by adding or deleting a specified set of events and specific set of match
parameter values.
Syntax Description
Default
If the
exclude
keyword is not used, the events will be included by the filter. If
severity
is not
specified, then the filter will use the component default severity threshold (see the note on on page 315
when
delete
or
exclude
is specified).
Usage Guidelines
This command controls the incidents that pass a filter by adding, or deleting, a specified set of events
that match a list of
<type> <value>
pairs. This command is an extension of the command
configure
log filter events
, and adds the ability to filter incidents based on matching specified event
parameter values to the event.
See the
configure log filter events
command on page 314 for more information on specifying and
using filters, on event conditions and components, and on the details of the filtering process. The
discussion here is about the concepts of matching
<type> <value>
pairs to more narrowly define
filters.
Types and Values. Each event in ExtremeWare XOS is defined with a message format and zero or
more parameter types. The
show log events
command on page 379 can be used to display event
name Specifies the filter to configure.
add Add the specified events to the filter.
delete Remove the specified events from the filter.
exclude Events matching the filter will be excluded.
event-condition Specifies the event condition.
all Specifies all events.
event-component Specifies all the events associated with a particular component.
severity Specifies the minimum severity level of events (if the keyword only is omitted).
only Specifies only events of the specified severity level.
match Specifies events whose parameter values match the <type> <value> pair.
strict-match Specifies events whose parameter values match the <type> <value> pair, and
possess all the parameters specified.
type Specifies the type of parameter to match.
value Specifies the value of the parameter to match.