Extreme Networks ExtremeWare XOS 11.0, Справочник по командам

Страница: 290 / 970

290 ExtremeWare XOS 11.0 Command Reference Guide
QoS Commands
configure qosprofile ports
configure qosprofile <qosprofile> [minbw <min_number> | maxbw <max_number>
| committed-rate <bps> [k | m] | peak-rate <bps> [k | m] | priority <level>
ports [<port_list> | all]
Description
Modifies the default QoS profile parameters.
Syntax Description
Default
• Minimum bandwidth—0%
• Maximum bandwidth—100%
• Priority—By default, each qosprofile is assigned a different priority level:
— QP1 - 1, Low (the lowest priority)
— QP2 - 2, LowHi
— QP3 - 3, Normal
— QP4 - 4, NormalHi
— QP5 - 5, Medium
— QP6 - 6, MediumHi
qosprofile Specifies a QoS profile name. Range is Qp1 to Qp8; the default is Qp1.
minbw <min_number> Specifies a minimum bandwidth percentage for this queue. The default setting
is 0.
maxbw <max_number> Specifies the maximum bandwidth percentage this queue is permitted to use.
The default setting is 100.
committed-rate <bps> [k | m] Specifies an absolute number in K bits or M bits that is guaranteed for this
queue.
peak-rate <bps> [k | m] Specifies an absolute number in K bits or M bits that is the maximum for this
queue.
priority <level> Specifies a service priority setting. Settings are:
• 1, or Low
• 2, or LowHi
• 3, or Normal
• 4 or NormalHi
• 5, or Medium
• 6, or MediumHi
• 8, or HighHi
This is the setting for the egress mode.
port_list Specifies a list of slots and ports to which the parameters apply. May be in the
form 3-5, 2:5, 2:6-2:8.
all Specifies this applies to all ports on the device.