Extreme Networks ExtremeWare XOS 11.0, Справочник по командам

Страница: 163 / 970

show snmpv3 target-addr
ExtremeWare XOS 11.0 Command Reference Guide 163
show snmpv3 target-addr
show snmpv3 target-addr {[[hex <hex_addr_name>] | <addr_name>]}
Description
Displays information about SNMPv3 target addresses.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to display entries in the SNMPv3 snmpTargetAddressTable. If no target address is
specified, the entries for all the target addresses will be displayed.
To view the source IP address, use the
show management
command.
Example
The following command displays the entry for the target address named A1 :
show snmpv3 target-addr A1
The following is sample output from this command:
Target Addr Name : A1
TDomain : 1.3.6.1.6.1.1
TAddress : 10.203.128.20, 162
TMask :
Retry Count : 0
Tag List : defaultNotify
Params : AllNotifyParam1
Storage Type : NonVolatile
Row Status : Active
History
This command was first available in ExtremeWare XOS 10.1.
This command was modified in ExtremeWare XOS 11.0 to display a list of tags if more than one was
configured and to display the timeout value for the entry in the snmpTargetAddrTable. This command
was also modified to support the
hex_addr_name
parameter.
hex_addr_name Specifies an identifier for the target address. The value is to be supplied as a
colon separated string of hex octets.
addr_name Specifies a string identifier for the target address.