Extreme Networks ExtremeWare XOS 11.0, Справочник по командам

Страница: 354 / 970

354 ExtremeWare XOS 11.0 Command Reference Guide
Commands for Status Monitoring and Statistics
enable log target
enable log target [console | memory-buffer | nvram | primary-msm |
backup-msm | session | syslog [all | ipaddress] {vr <vr_name>} [local0 ...
local7]]]
Description
Starts sending log messages to the specified target.
Syntax Description
Default
Enabled, for memory buffer and NVRAM; all other targets are disabled by default.
Usage Guidelines
This command starts sending messages to the specified target. By default, the memory-buffer, NVRAM,
primary MSM, and backup MSM targets are enabled. Other targets must be enabled before messages
are sent to those targets.
Configuration changes to the
session
target are in effect only for the duration of the console display or
Telnet session, and are not saved in FLASH. Others are saved in FLASH.
Note that the
backup-msm
target is only active on the primary MSM, and the
primary-msm
target is only
active on the backup MSM.
Example
The following command enables log messages on the current session:
enable log target session
console Specifies the console display.
memory-buffer Specifies the switch memory buffer.
nvram Specifies the switch NVRAM.
primary-msm Specifies the primary MSM.
backup-msm Specifies the backup MSM.
session Specifies the current session (including console display).
syslog Specifies a syslog target.
all Specifies all of the remote syslog servers.
ipaddress Specifies the syslog IP address.
vr_name Specifies the virtual router that can reach the server IP address.
local0 ... local7 Specifies the local syslog facility.