Extreme Networks ExtremeWare XOS 11.0, Справочник по командам

Страница: 156 / 970

156 ExtremeWare XOS 11.0 Command Reference Guide
Commands for Managing the Switch
show snmpv3 filter-profile
show snmpv3 filter-profile {[[hex <hex_profile_name>] | <profile_name>]}
{param [[hex <hex_param_name>] | <param_name>]}
Description
Displays the association between parameter names and filter profiles.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to display the snmpNotifyFilterProfileTable. This table associates a filter profile with
a parameter name. The parameter name is associated with target addresses, and the filter profile is
associated with a series of filters, so, in effect, you are associating a series of filters with a target address.
Example
The following command displays the entry with filter profile prof1 with the parameter name P1 :
show snmpv3 filter-profile prof1 param P1
The following is sample output of this command:
Filter Profile Params Name : p1
Name : prof1
Storage Type : NonVolatile
Row Status : Active
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_profile_name
and
hex_param_name
parameters were added in ExtremeWare XOS 11.0.
hex_profile_name Specifies the filter profile name. The value is to be supplied as a colon
separated string of hex octets.
profile_name Specifies the filter profile name in ASCII format.
hex_param_name Specifies the parameter name. The values is to be supplied as a colon
separated string of hex octets.
param_name Specifies the parameter name in ASCII format.