Extreme Networks ExtremeWare XOS 11.0, Справочник по командам

Страница: 247 / 970

create vlan
ExtremeWare XOS 11.0 Command Reference Guide 247
create vlan
create vlan <vlan_name> {vr <vr-name>}
Description
Creates a named VLAN.
Syntax Description
Default
A VLAN named Default exists on all new or initialized Extreme switches:
• It initially contains all ports on a new or initialized switch, except for the management port(s), if
there are any.
• It has an 802.1Q tag of 1.
• The default VLAN is untagged on all ports.
• It uses protocol filter
any
.
A VLAN named Mgmt exists on switches that have management modules or management ports.
• It initially contains the management port(s) the switch.
• It is assigned the next available internal VLANid as an 802.1Q tag.
If you do not specify the virtual router, the VLAN is created in the current virtual router.
Usage Guidelines
A newly-created VLAN has no member ports, is untagged, and uses protocol filter
any
until you
configure it otherwise. Use the various
configure vlan
commands to configure the VLAN to your
needs.
Internal VLANids are assigned automatically using the next available VLANid starting from the high
end (4095) of the range.
Each VLAN name can be up to 32 standard alphanumeric characters, but must begin with an
alphabetical letter. Quotation marks can be used to enclose a VLAN name that does not begin with an
alphabetical character, or that contains a space, comma, or other special character.
NOTE
If you use the same name across categories (for example, STPD and EAPS names), Extreme Networks
recommends that you specify the identifying keyword as well as the actual name. If you do not use the
keyword, the system may return an error message.
vlan_name Specifies a VLAN name (up to 32 characters).
vr Specifies a virtual router.
vr-name Specifies in which virtual router to create the VLAN.