Extreme Networks ExtremeWare XOS 11.0, Справочник по командам

Страница: 187 / 970

configure ports auto off
ExtremeWare XOS 11.0 Command Reference Guide 187
configure ports auto off
configure ports <port_list> auto off speed [10 | 100 | 1000 | 10000] duplex
[half | full]
Description
Manually configures port speed and duplex setting configuration on one or more ports on a switch.
Syntax Description
Default
Auto on for 1 G ports.
Auto off for 10 G ports.
Usage Guidelines
On a modular switch,
<port_list>
can be a list of slots and ports. For a detailed explanation of port
specification, see “Modular Switch Numerical Ranges” in Chapter 1.
You can manually configure the duplex setting and the speed on 10/100/1000 Mbps and fiber SFP
Gigabit Ethernet ports.
SFP Gigabit Ethernet ports are statically set to 1 Gbps, and their speed cannot be modified.
In certain interoperability situations, it is necessary to turn autonegotiation off on a fiber Gigabit
Ethernet port. Even though a Gigabit Ethernet port runs only at full duplex and gigabit speeds, the
command that turns off autonegotiation must still include the duplex setting.
Gigabit Ethernet ports support flow control only when autonegotiation is turned on. When
autonegotiation is turned off, flow control is not supported.
The 10 G ports always support flow control.
Example
The following example turns autonegotiation off for slot 2, port 1 on a modular switch:
configure ports 2:1 auto off duplex full
port_list Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. May be in the form 3-5, 2:*, 2:5, 2:6-2:8.
speed [10] Specifies 10 Mbps ports.
speed [100] Specifies 100 Mbps ports.
speed [1000] Specifies 1000 Mbps (1 Gigabit) ports.
speed [10000] Specifies 10000 Mbps (10 Gigabit) ports.
duplex [half] Specifies half duplex; transmitting and receiving data one direction at a time.
duplex [full] Specifies full duplex; transmitting and receiving data at the same time.