Extreme Networks ExtremeWare XOS 11.0, Справочник по командам

Страница: 530 / 970

530 ExtremeWare XOS 11.0 Command Reference Guide
STP Commands
show stpd ports
show stpd <stpd_name> ports {[detail | <port_list> {detail}]}
Description
Displays the STP state of a port.
Syntax Description
Default
N/A.
Usage Guidelines
This command displays the following:
• STPD port configuration
• STPD port encapsulation mode
• STPD path cost
• STPD priority
• STPD state (root bridge, and so on)
• Port role (root bridge, edge port, etc.)
• STPD port state (forwarding, blocking, and so on)
• Configured port link type
• Operational port link type
Use the
detail
option to display detailed formats for all ports or for the specified ports.
If your STPD has the same name as another component, for example a VLAN, Extreme Networks
recommends that you specify the identifying keyword as well as the name. If you do not specify the
stpd
keyword, an error message similar to the following is displayed:
%% Ambiguous command: "show Test ports"
In this example, to view all of the port settings of STPD Test , enter
show stpd Test ports
.
If your STPD has a name unique only to that STPD, the keyword
stpd
is optional.
Example
The following command displays the state of slot 3, ports 1 through 3 on an STPD named s0 :
show stpd S0 ports 3:1-3:3
stpd_name Specifies an STPD name.
port_list Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.
detail Specifies more detailed information about one or more ports of the STPD.