Extreme Networks ExtremeWare XOS 11.0, Справочник по командам

Страница: 489 / 970

show eaps
ExtremeWare XOS 11.0 Command Reference Guide 489
Example
The following display shows sample output for the command
show eaps
:
EAPS Enabled: Yes
EAPS Fast-Convergence: Off
Number of EAPS instances: 2
# EAPS domain configuration :
--------------------------------------------------------------------------------
Domain State Mo En Pri Sec Control-Vlan VID Count
--------------------------------------------------------------------------------
d1 Complete M Y 3:8 3:16 c1 (1000) 100
d2 Links-Up T Y 3:8 3:16 c2 (1001) 100
--------------------------------------------------------------------------------
The following display shows sample output for the command
show eaps <eapsDomain>
:
Name: d1
State: Complete Running: Yes
Enabled: Yes Mode: Master
Primary port: 3:8 Port status: Up Tag status: Tagged
Secondary port: 3:16 Port status: Blocked Tag status: Tagged
Hello timer interval: 1 sec
Fail timer interval: 3 sec
Fail Timer expiry action: Send alert
Last update: From Master Id 00:01:30:f9:9c:b0, at Wed Jun 9 09:09:35 2004
EAPS Domain has following Controller Vlan:
Vlan Name VID
c1 1000
EAPS Domain has following Protected Vlan(s):
Vlan Name VID
p_1 1
p_2 2
Hello Timer interval: The configured value of the timer in seconds, specifying the time that the
master node waits between transmissions of health check packets.
Fail Timer interval: The configured value of the timer in seconds, specifying the time that the
master node waits before the failtimer expires.
Failtimer expiry action: Displays the action taken when the failtimer expires:
• Send-alert—Sends a critical message to the syslog when the failtimer
expires.
• Open-secondary-port—Opens the secondary port when the failtimer
expires.
Displays only for master nodes.
Preforwarding Timer interval:
1
The configured value of the timer. This value is set internally by the EAPS
software.
Last update: 1 Displayed only for transit nodes; indicates the last time the transit node
received a hello packet from the master node (identified by its MAC address).
EAPS Domain has … Controller
Vlans: Lists the assigned name and ID of the control VLAN.
EAPS Domain has … Protected
Vlans:
2
Lists the assigned names and VLAN IDs of all the protected VLANs
configured on this EAPS domain.
Number of Protected Vlans: The count of protected VLANs configured on this EAPS domain.
1. These fields apply only to transit nodes; they are not displayed for a master node.
2. This list is displayed when you use the
detail
keyword in the show eaps command.