Extreme Networks ExtremeWare XOS 11.0, Справочник по командам

Страница: 423 / 970

configure tacacs server
ExtremeWare XOS 11.0 Command Reference Guide 423
configure tacacs server
configure tacacs [primary | secondary] server [<ipaddress> | <hostname>]
{<tcp_port>} client-ip <ipaddress> {vr <vr_name>}
Description
Configures the server information for a authentication server.
Syntax Description
Default
uses TCP port 49. The default virtual router is VR-0, the management virtual router
Usage Guidelines
Configure the server information for a server.
To remove a server, use the following command:
unconfigure tacacs server [primary | secondary]
Use of the <hostname> parameter requires that DNS be enabled.
Example
The following command configures server tacacs1 as the primary server for client switch
10.10.20.35 using a virtual router interface of VR-2:
configure tacacs primary server tacacs1 client-ip 10.10.20.35 vr vr-2
History
This command was available in ExtremeWare XOS 10.1.
primary Configures the primary server.
secondary Configures the secondary server.
ipaddress The IP address of the server being configured.
hostname The host name of the server being configured.
tcp_port The TCP port to use to contact the server.
ipaddress The IP address used by the switch to identify itself when communicating with
the server.
vr_name Specifies the virtual router on which the client IP is located.