Extreme Networks ExtremeWare XOS 11.0, Справочник по командам

Страница: 133 / 970

show checkpoint-data
ExtremeWare XOS 11.0 Command Reference Guide 133
show checkpoint-data
show checkpoint-data {<process>}
Description
Displays the status of one or more processes being copied from the master MSM to the backup MSM.
Syntax Description
Default
N/A.
Usage Guidelines
This command displays, in percentages, the amount of copying completed by each process and the
traffic statistics between the process on both the master and the backup MSMs.
This command is also helpful in debugging synchronization problems that occur at run-time. To check
the status of synchronizing the MSMs, use the
show switch
command.
Example
The following command displays the checkpointing status and the traffic statics of all of the processes
between the master and the backup MSM:
show checkpoint-data
The following is sample output from this command:
Process Tx Rx Sent Total % Chkpt Debug-info
------------------------------------------------------------------
devmgr 235 143 7 7 100% ON OK 1 (00008853)
ems 0 0 0 0 0% ON OK 1 (000008D3)
msgsrv 0 0 0 0 100% ON OK 1 (000008D3)
nodemgr 0 0 0 0 0% ON OK 1 (000008D3)
dirser 0 0 0 0 0% ON OK 1 (000008D3)
cfgmgr 49 49 100 100 100% ON OK 1 (000018D3)
cli 0 0 0 0 0% ON OK 1 (000018D3)
snmpSubagent 0 0 0 0 0% ON OK 1 (000018D3)
snmpMaster 0 0 0 0 0% ON OK 1 (000008D3)
edp 0 0 0 0 0% ON OK 1 (000008D3)
vlan 256 4 0 0 100% ON OK 1 (000008D3)
eaps 0 0 0 0 0% ON OK 1 (000008D3)
aaa 0 0 0 0 0% ON OK 1 (000008D3)
fdb 14 2 0 0 100% ON OK 1 (000008D3)
stp 0 0 0 0 0% ON OK 1 (000008D3)
esrp 0 0 0 0 0% ON OK 1 (000008D3)
rtmgr 2 2 0 0 100% ON OK 1 (000008D3)
netTools 0 0 0 0 0% ON OK 1 (000008D3)
acl 0 0 0 0 0% ON OK 1 (000008D3)
process Specifies the name of the processes being copied.