Extreme Networks ExtremeWare XOS 11.0, Справочник по командам

Страница: 318 / 970

318 ExtremeWare XOS 11.0 Command Reference Guide
Commands for Status Monitoring and Statistics
definitions (the event text and parameter types). The syntax for the parameter types (represented by
<type>
in the command syntax above) is:
[bgp [neighbor | routerid] <ip address>
| {destination | source} [ipaddress <ip address> | L4-port | mac-address ]
| {egress | ingress} [slot <slot number> | ports <portlist>]
| netmask <netmask>
| number <number>
| string <match expression>
| vlan <vlan name>
| vlan tag <vlan tag>]
The
<value>
depends on the parameter type specified. As an example, an event may contain a physical
port number, a source MAC address, and a destination MAC address. To allow only those incidents
with a specific source MAC address, use the following in the command:
configure log filter myFilter add events aaa.radius.requestInit secerity notice match
source mac-address 00:01:30:23:C1:00
The string type is used to match a specific string value of an event parameter, such as a user name. A
string can be specified as a simple regular expression.
Match Versus Strict-Match. The
match
and
strict-match
keywords control the filter behavior for
incidents whose event definition does not contain all the parameters specified in a
configure log
filter events match
command. This is best explained with an example. Suppose an event in the
XYZ component, named XYZ.event5 , contains a physical port number, a source MAC address, but no
destination MAC address. If you configure a filter to match a source MAC address and a destination
MAC address,
XYZ.event5 will match the filter when the source MAC address matches regardless of the
destination MAC address, since the event contains no destination MAC address. If you specify the
strict-match
keyword, then the filter will never match, since XYZ.event5 does not contain the
destination MAC address.
In other words, if the
match
keyword is specified, an incident will pass a filter so long as all parameter
values in the incident match those in the match criteria, but all parameter types in the match criteria
need not be present in the event definition.
More Information. See the command
show log
on page 364 for more information about severity
levels.
To get a listing of the components present in the system, use the following command:
show log components
To get a listing of event condition definitions, use the following command:
show log events
To see the current configuration of a filter, use the following command:
show log configuration filter {<filter name>}