Extreme Networks ExtremeWare XOS 11.0, Справочник по командам

Страница: 135 / 970

show management
ExtremeWare XOS 11.0 Command Reference Guide 135
show management
show management
Description
Displays the SNMP settings configured on the switch.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines:
The following management output is displayed:
• Enable/disable state for Telnet, and SNMP access
• Login statistics
— Enable/disable state for idle timeouts
— Maximum number of CLI sessions
• SNMP community strings
• SNMP trap receiver list
For ExtremeWare XOS 11.0 and later, the following management output is also displayed:
• SNMP trap receiver source IP address
• SNMP statistics counter
• SSH access states of enabled, disabled, and module not loaded
• SNMP access states of v1, v2c disabled and v3 enabled
If all three types of SNMP access are enabled or disabled, SNMP access is displayed as either
Enabled or Disabled.
Example
The following command displays configured SNMP settings on the switch:
show management
The following is sample output from this command:
CLI idle timeout : Disabled
CLI max number of login attempts : 3
CLI max number of sessions : 8
CLI configuration logging : Disabled
Telnet access : Enabled (tcp port 23 vr all)
SSH access : Disabled (Key invalid, tcp port 22)
SNMP access : v1, v2c Disabled, v3 Enabled