Extreme Networks ExtremeWare XOS 11.0, Справочник по командам

Страница: 98 / 970

98 ExtremeWare XOS 11.0 Command Reference Guide
Commands for Managing the Switch
configure snmpv3 add user
configure snmpv3 add user [[hex <hex_user_name>] | <user_name>]
{authentication [md5 | sha] [hex <hex_auth_password> | <auth_password>]}
{privacy [hex <hex_priv_password> | <priv_password>]} {volatile}
Description
Adds (and modifies) an SNMPv3 user.
Syntax Description
Default
The default values are:
• authentication—no authentication
• privacy—no privacy
• non-volatile storage
Usage Guidelines
Use this command to create or modify an SNMPv3 user configuration.
If hex is specified, supply a 16 octet hex string for MD5, or a 20 octet hex string for SHA.
You must specify authentication if you want to specify privacy. There is no support for privacy without
authentication.
The default user names are: admin, initial, initialmd5, initialsha, initialmd5Priv, initialshaPriv . The initial
password for admin is password . For the other default users, the initial password is the user name.
Example
The following command configures the user guest on the local SNMP Engine with security level
noauth
(no authentication and no privacy):
configure snmpv3 add user guest
hex_user_name Specifies the user name to add or modify. The value is to be supplied as a
colon separated string of hex octets.
user_name Specifies the user name to add or modify in ASCII format.
MD5 Specifies MD5 authentication.
SHA Specifies SHA authentication.
authentication Specifies the authentication password or hex string to use for generating the
authentication key for this user.
privacy Specifies the privacy password or hex string to use for generating the privacy
key for this user.
volatile Specifies volatile storage.