Extreme Networks ExtremeWare XOS 11.0, Справочник по командам

Страница: 266 / 970

266 ExtremeWare XOS 11.0 Command Reference Guide
Commands for Virtual Routers
configure vr add ports
configure vr <vr-name> add ports <portlist>
Description
Assigns a list of ports to the virtual router specified.
Syntax Description
Default
By default, all ports are assigned to the virtual router, VR-Default.
Usage Guidelines
When a new virtual router is created, by default, no ports are assigned, no VLAN interface is created,
and no support for any routing protocols is added. Use this command to assign ports to a virtual router.
Since all ports are initially assigned to VR-Default, you may need to delete the desired ports first from
the virtual router where they reside, before you add them to the desired virtual router.
Example
The following command adds all the ports on slot 2 to the virtual router vr-acme :
configure vr vr-acme add ports 2:*
History
This command was first available in ExtremeWare XOS 11.0.
vr-name Specifies the name of the virtual router.
portlist Specifies the ports to add to the virtual router.