Extreme Networks ExtremeWare XOS 11.0, Справочник по командам

Страница: 83 / 970

configure snmpv3 add access
ExtremeWare XOS 11.0 Command Reference Guide 83
• write view name— “”
• notify view name—defaultNotifyView
• non-volatile storage
Usage Guidelines
Use this command to configure access rights for a group. All access groups are created with a unique
default context, “”, as that is the only supported context.
A number of default (permanent) groups are already defined. These groups are: admin, initial, v1v2c_ro ,
v1v2c_rw.
• The default groups defined (permanent) are v1v2c_ro for security name v1v2c_ro , v1v2c_rw for
security name v1v2c_rw , admin for security name admin , and initial for security names initial ,
initialmd5 , initialsha , initialmd5Priv and initialshaPriv .
• The default access defined (permanent) are admin , initial , v1v2c_ro , v1v2c_rw , and v1v2cNotifyGroup.
Example
In the following command, access for the group defaultROGroup is created with all the default values:
security model
usm
, security level
noauth
, read view defaultUserView , no write view, notify view
defaultNotifyView , and storage nonvolatile.
configure snmpv3 add access defaultROGroup
In the following command, access for the group defaultROGroup is created with the values: security
model
USM
, security level
authnopriv
, read view defaultAdminView , write view defaultAdminView , notify
view defaultAdminView , and storage nonvolatile.
configure snmpv3 add access defaultROGroup sec-model usm sec-level authnopriv
read-view defaultAdminView write-view defaultAdminView notify-view defaultAdminView
History
This command was first available in ExtremeWare XOS 10.1.
The
hex_read_view_name
,
hex_write_view_name
, and
hex_notify_view_name
parameters were added
in ExtremeWare XOS 11.0.