Extreme Networks ExtremeWare XOS 11.0, Справочник по командам

Страница: 940 / 970

940 ExtremeWare XOS 11.0 Command Reference Guide
Configuration and Image Commands
save configuration
save configuration {primary | secondary | <existing-config> | <new-config>}
Description
Saves the current configuration from the switch’s runtime memory to non-volatile memory.
Syntax Description
Default
Saves the current configuration to the location used on the last reboot.
Usage Guidelines
The configuration takes effect on the next reboot.
Each file name must be unique and can be up to 32 characters long but cannot include any spaces,
commas, or special characters.
Configuration files have a .cfg file extension. When you enter the name of the file in the CLI, the system
automatically adds the .cfg file extension.
This command also displays in alphabetical order a list of available configurations. The following is
sample output that displays the primary, secondary, and user-created and defined configurations (
“test”
and “XOS1” are the names of the user-created and defined configurations):
exsh.9 # save configuration
<cr> Execute the command
primary Primary configuration file
secondary Secondary configuration file
<existing-config> Existing configuration file name
"test" "XOS1"
<new-config> New configuration file name
You are prompted to save your configuration changes. Enter
y
to save the changes, or
n
to cancel the
process. The following sample output is similar to the message displayed:
exsh.9 # save configuration XOS1
Do you want to save configuration to XOS1.cfg? (y or n)
If you enter
y
, a message similar to the following is displayed:
Saving configuration on primary MSM ............................ done!
Configuration saved to XOS1.cfg successfully.
primary Specifies the primary saved configuration.
secondary Specifies the secondary saved configuration.
existing-config Specifies an existing user-defined configuration.
new-config Specifies a new user-defined configuration.