eta 0038/00, Инструкция по эксплуатации

Страница: 70 / 192

On/off switching of the food processor
Before you switch on the food processor, plug the A11 power cord into electric socket.
Then switch on the food processor by rotating the speed regulating knob A2 . After you
finish working, switch off the food processor by rotating the speed regulating knob to
position 0 or after 10 minutes (unless the “timer” is set), the food-processor will switch off
automatically.
Speed control (Fig. 5)
Speed is controlled by setting the speed regulating knob A2 to the desired position within
the interval 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 . For short operation time at the maximum speed, the
regulating knob can be set to position “ P ” (PULSE). The regulating knob must be held
by hand in this position. Releasing the regulating knob will return it to position 0 and stop
rotating.
Time setting (Fig. 5)
– When you press or hold the + or – button, you can set the length of processing time
in 30 second increments. Confirm the time by pressing the OK button. The maximum
length of time which can be set is 10 minutes. As time goes by, the figures of the time
set will be gradually decreasing.
– To readjust the time you have set, proceed in the same way.
– To switch the food-processor on again, you need to return the speed control knob A2 to
position 0 first.
Multifunctional head attachment security safeguard
In order to disassemble the food processor and to remove the attachments from A4 front
mount for attachments, apply a reverse procedure. Before removing the attachments from
the motor unit head, you first have to push the release button A5 .
Blender security safeguard
The food processor cannot be switched on, if the blender cover A8 is removed,
and the blender or the food chopper is not correctly fixed. The display shows the E03 sign.
Food processing time depends on the volume, type and quality of the processed
ingredients. It usually takes several minutes under normal conditions.
III. 2 ) Whipping, mixing and flexi whisk; kneading hook
Description
(Fig. 1)
C1 – Mixing whisk C4 – Flexi (rubber) whisk
C2 – Whipping (wire) whisk C5 – Hook for gluten-free dough
C3 – Kneading hook C6 – Release lever
Assemblyforworkwithattachments
Assemble the food processor according to instructions in Figure No. 2, 3 and 4 by lifting
the multifunctional head up and putting the bowl lid on its bottom side. Then put the bowl
with the food in the lower section of the food processor. Then install the desired adapter
on the mount, and tilt the multifunctional head downward to the working position. Apply
reverse sequence to remove/exchange the adapter.
70
GB
/ 184