eta 0038/00, Инструкция по эксплуатации

Страница: 72 / 192

– Adjust the processing speed according to the volume, type and quality of the
food you are processing, in the interval 1 to 8 .
– The maximum amount of ingredients per processing cycle is about 3.0 kg,
(see the Table of Use, Chapter IV).
– Never use the mixing whisk for kneading heavy dough!
D)Kneading
– Use the kneading hook C3 for kneading crispy / light / heavy dough.
– Use the hook for gluten-free dough C5 for kneading gluten-free dough.
– Adjust the processing speed according to the volume, type and quality of the
food you are processing, in the interval 1 to 2 .
– If you process a larger amount of dough, process it in several batches.
The maximum amount of ingredients per processing cycle is about 2.0 kg,
(see the Table of Use, Chapter IV). Donotrunmorethanfourconsecutive
cycles.
Make a break of at least 30 minutes before you continue.
Tipy
– Ingredients will best mix if you add the liquid first.
– If the speed control knob is backlit in red, or if you can hear that the food-processor is
subject to excessive strain, switch it off, remove half of the dough, and process each
half of the dough separately, or reduce the pressure applied to the pusher for the
attached accessories.
III. 3 ) Mincer (D)
Description (Fig. 6)
D0 – Mincer body
D1 – Spiral feeder D10 – Separator
D2 – Cutting blade D11 – Adapter for smoked food
D3 – Fine mincing disc D12 – Former
D4 – Medium mincing disc D13 – Cone
D5 – Coarse mincing disc D14 – Pusher
D6 – Extra coarse mincing disc D15 – Hopper
D7 – Nut D16 – Cogwheel
D8 – Confectionery decoration nozzle holder D17 – Release lever
D9 – Confectionery decoration nozzle D18 – Cleaning tool
Safetyhintsandtips
– We recommend interrupting the operation from time to time, switch off the food
processor and remove the food stuck on the attachments (or blocking the attachments).
– Never let the mincer running if the hopper is empty!
– Do not mince frozen meat.
Assembly
Assemble the mincer according to the intended use (for meat, smoked food, Kebbe,
confectionery) and mount it on the main motor unit – see Figures 6 and 7.
Apply reverse procedure to disassemble the mincer and to remove it from the motor unit
head. Loosen the
D7
nut using the release lever
D17
.
72
GB
/ 184