Endress+Hauser Micropilot NMR84, Руководство по эксплуатации

Страница: 237 / 256

Micropilot NMR84 Operating menu
Hauser 237
"Administration" submenu
Navigation  Setup → Advanced setup → Administration
Define access code 
Navigation  Setup → Advanced setup → Administration → Def. access code
Description Define release code for write access to parameters.
User entry 0 to 9 999
Factory setting 0
Additional information
Read access Operator
Write access Maintenance
If the factory setting is not changed or 0 is defined as the access code, the parameters
are not write-protected and the configuration data of the device can then always be
modified. The user is logged on in the Maintenance role.
The write protection affects all parameters marked with the symbol in this
document.
Once the access code has been defined, write-protected parameters can only be
modified if the access code is entered in the Enter access code parameter
(→  124).
Device reset 
Navigation  Setup → Advanced setup → Administration → Device reset
Description Reset the device configuration - either entirely or in part - to a defined state.
Selection • Cancel
• To factory defaults
• Restart device
Factory setting Cancel
Additional information Meaning of the options
• Cancel
No action
• To factory defaults
All parameters are reset to the order-code specific factory setting.
• Restart device
The restart resets every parameter which is stored in the volatile memory (RAM) to the
factory setting (e.g. measured value data). The device configuration remains unchanged.