14.01.2019
129/185
CI 3x00 store computer / AL 300 operator terminal - remote control
The main menu of the controller is called in the store computer or operator terminal via the remote control as
follows:
Step 1:
Select the submenu "5 Remote control" in the main menu (see graphic).
Step 2:
Select the required controller using the cursor buttons (↑) and (↓) or by input of the CAN bus address
(node number
nnn
) using the digit buttons. Thereby, the following screen is displayed:
Step 3:
the main menu of the controller is displayed on the terminal by tapping the
ENTER
button (if necessary,
the input lock must be deactivated before the entry of values; see
).
9.2.3 Deactivating the input lock
Operation via system centre, store computer or operator terminal is only possible for controllers with CAN bus
connection; the removal of the lock-down is then applicable for all components in the CAN bus system. The
lock-down is automatically reactivated 15 minutes after the last button tap.
Содержание VS 3015 C
Страница 8: ...14 01 2019 8 185...
Страница 46: ...14 01 2019 46 185...
