ECKELMANN VS 3015 C, Инструкция по эксплуатации

Страница: 57 / 185

14.01.2019 57/185
Men
u
ECO POS: XXXXX Description Input Defa
ult
Dim
.
3-2-4 Z2 Regulation
→ Selection menu Z2 Regulation.
The parameter must be set to "ECO operation" for the activation of the ECO
operation.
OFF
ECO-
Betrieb
TK-
Verdichter
OFF -
3-2-4 Temp.ECO EIN
XX °C
Switch-on temperature for the ECO operation solenoid valve
--: The switch-on temperature for the HRC ECO operation solenoid valve is
ignored.
--, 20..40 29 °C
3-2-4 T.ECO EIN WRG Switch-on temperature for the HRC ECO operation solenoid valve when gas
cooler bypass is active
--: The switch-on temperature for the HRC ECO operation solenoid valve is
ignored.
--, 15..40 29 °C
3-2-4 Hysterese XX K Difference for the ECO operation switch-on temperature, using which the
temperature
for the shutdown of the ECO operation is defined.
2..10 4 K
3-2-4 Min.ÖG MD-V Minimum opening degree of the medium pressure valve for the enable of the
ECO compressors
10..80
60 %
3-2-4 Z2-Standzeit Minimum standstill time of the ECO compressor 10..360 300 sec.
3-2-4 ECO-Verdichter * Activation of the ECO compressors
YES: ECO compressors are controlled via the VS 3015 C
NO: ECO compressors are controlled via a separate VS 3010
Y/N N -
The following parameters are only visible if "ECO-Verdichter" = Yes
3-2-4
Anz. Z2-
Verdichter Number of Z2 compressors 1..2 2 -
3-2-4 Basisz.LeiStu.
ON →
Display basic times t
b
ON →
Screen
3-2-4-a
Screen
3-2-4-b
Screen
3-2-4-c
Screen
3-2-4-d
3-2-4 Vari.Z.LeiStu. ON
→
Display of the variable times t
v
ON →
3-2-4 Basisz.LeiStu.
OFF →
Display basic times t
b
OFF →
3-2-4 Vari.Z.LeiStu.
OFF →
Display of the variable times t
v
OFF →
3-2-4 Regelkonstante
XX K
Max. control error for variable control times 1..15 3 K
3-2-4 Frei.M.Sch.Z2 Enable for the motor protection monitoring of the Z2 compressors Y/N Y -
3-2-4 F.Öl/HD-St.Z2 Enable for the oil/HP monitoring of the Z2 compressors Y/N Y -
3-2-4 P-Wert X.X P-factor of the combined control for the Z2 compressors
Example: for control error of 1 K with a P-Wert of 1, the P-component is 1 V
0.0..3.0 0.7 V/K