ECKELMANN VS 3015 C, Инструкция по эксплуатации

Страница: 92 / 185

14.01.2019 92/185
6.3.5 Setting of the interface of the internal SIOX using jumper J2
The jumper J2 specifies the function of the interface.
Jumper J2 Jumper position Interface Function
Left Communication to the
internal SIOX
Factory setting
6.3.6 Configuration of the analogue inputs and outputs at the factory
The analogue inputs and outputs are configured as follows at the factory:
Analogue inputs 1..5 and 7 4..20 mA
Analogue input 6 0..10 V
Analogue outputs 1..4 0..10 V
Reconfiguration of the interface for the internal SIOX is only required if settings other than those in the
delivery condition are required. A reconfiguration or any opening of the controller must only be
performed by trained personnel or at the factory by the manufacturer. Incorrect handling can result in
damage and impairment of the controller functions!

Important safety information! Any maintenance by the user is not intended as possible hazards from
incorrect re-assembly cannot be ruled out. Opening the device is not authorised! Reconfiguration of the
analogue inputs and outputs is not necessary. Incorrect handling can result in damage and impairment
of the controller functions!
