14.01.2019
130/185
Before entering values, the input lock-down must be deactivated.
CI 4x00 system centre - login and logout
Login to and logout (unlock and lock-down) of the system centre:
CI 3x00 store computer / AL 300 operator terminal - unlock
Before entering values, the input lock on the store computer or operator terminal must be deactivated as
follows:
Step 1:
Select menu item 9 "Parametrisation" in the main menu.
Step 2:
Select menu item 3 "Lock-down" in this menu.
Step 3: A. Unlocking store computer (standard)
Tap the
ENTER
button (
) to set the marker (√). The lock-
down has now been deactivated and it is possible to make settings.
or B. Unlocking store computer and
activating Superuser mode (Superuser permissions)
Input current date backwards (nothing is shown on the
display).
Example:
The current date is April 17, 2016, i.e. 17/04/16; the required input for enabling Superuser
permissions is then 614071.
Confirm the input with the
ENTER
button (
); an "S" is shown on the display.
Step 4:
Exit the operating screen and return to the main menu by tapping the ESC button twice.
9.2.4 Activating service mode
For repair and maintenance work, service personnel can deactivate the remote alarm function of the system
centre and of the store computer for a limited period using the service mode.
The deactivation of the lock is exclusively reserved for service personnel!
Tip:
If you are already in the user interface of a CAN bus node but have forgotten to deactivate the
input lock-down, you can unlock the input lock-down for this controller using the button combination
MODE
and
,
. The input lock-down is active again as soon as you exit the user interface of the
controller.
Содержание VS 3015 C
Страница 8: ...14 01 2019 8 185...
Страница 46: ...14 01 2019 46 185...
