Screen overview
For more information visit:
www.EatonElectrical.com
MN05013005E
293
Screen 5:
Format: WD DD.MM.YY
Display of weekday and date in normal font size.
Screen 6:
Format: HH:MM
Display of hour and minute in single font size.
Screen 7:
Display of different formats possible in one screen. Display in
normal font size.
Screen 8:
Display invisible if I1 actuated. (make contact bit logic!)
Example program 2 – different display formats with
automatic screen change
This program is a copy of the program Date_and_Time_01
except that the screen change here is automatic. The program
consists of eight screens that can be activated in succession
via the counter C01. The pulse signals are generated with
timing relay T01. This produces the counter values 0 to 9.
Counter value 1 activates screen 1, counter value 2 activates
screen 2 etc. If upper switch value SH = 9, the counter resets
itself. This therefore produces a continuous loop. The
language setting for all eight screens is “English”.
Examples Folder:
Files can be found on the EZSoft CD-ROM
in the Examples folder.
Program:
Date_and Time_02
Example program 3 – different country settings
The program consists of 11 screens that can be activated
automatically via the counter C01. The pulse signals are
generated with timing relay T01. This produces the counter
values 0 to 12. Counter value 1 activates screen 1, counter
value 2 activates screen 2 etc. If upper switch value SH = 12,
the counter resets itself. This therefore produces a continuous
loop.
Each screen contains a different country setting. However,
this same WD DD MM YY format is shown.
WED 01.10.03
Invisible
via I1!
01.10.2003