For more information visit:
www.EatonElectrical.com
Programming wiring
MN05013005E
148
The editor for inputting a function block is displayed.
Select the desired function block and number with the
ÍÚú í
cursor buttons.
The functions of the individual function blocks are explained in
the individual function block descriptions on the following
pages.
This display appears if there are function blocks present.
The function blocks are created in the sequence in which they
were edited.
Calling up function blocks from the circuit diagram
If you enter a function block parameter from the circuit
diagram, you will jump from the circuit diagram editor to the
function block editor automatically. Once you have assigned
the parameters, you will return to the position where you left
the circuit diagram with Save or Cancel. The operation is
carried out in the same way as with circuit diagram operation.
Example: timing relay function block
AR
01
L:001 B:7988
AR
01 ADD
+
CP10
+
T 18 ?X
-
L:001 B:6488
T 01 X? M:S +
>I1 20:30
>I2
QV> MD96
L:001
B:7808
Function block:
Timing relay
Switch function:
On-delayed with random switching
Time range:
M:S (Minute:Seconds)
Set time >I1:
20 min 30 s
Actual time QV>:
Copied to MD96
