Eaton EZD Series Скачать руководство пользователя

Страница: 47 / 448

Mounting

For more information visit:

www.EatonElectrical.com

MN05013005E

Removing the power supply/CPU module

The power supply/CPU module can be removed with or

without the I/O module.

Figure 22: Releasing the fixing shaft

Use a screwdriver with a 100 x 3.5 mm slot width.

Insert the screwdriver into the lug of the fixing shaft catch.

Lever out the slide catch.

Pull out the power supply/CPU module from the fixing

shafts.

Mounting on top-hat rail

The power supply/CPU module can be mounted on a top-hat

rail without the display/operating unit.
The fastening catches must be removed in order to mount the

device on a fastened top-hat rail.

If there is another fixing point for the top-hat rail, apart from

the one for the display/operating unit, undo it.

Содержание EZD Series

































































































































































































































































































































































































































































Результаты поиска

Содержание EZD Series

Отзывы:

Похожие инструкции для EZD Series

Бренды по названию

Популярные бренды

Eaton EZD Series, Руководство пользователя

Результаты поиска

Содержание EZD Series

Отзывы:

Похожие инструкции для EZD Series

Бренды по названию

Популярные бренды