For more information visit:
www.EatonElectrical.com
Programming wiring
MN05013005E
274
C
01C
is the counter coil of the counter 01 function block.
Figure 147: EZD wiring and circuit diagram
X
Keep the cursor on the number.
X
Press the
OK
button.
The first part of the parameter set of a counter is displayed.
X
Move the cursor
í
over the
+
character to the value input
behind
>SH
:
–
>SH
means: function block input upper counter setpoint
value
– The
+
character means that the parameters of this timing
relay can be modified using the PARAMETERS menu.
X
Change the upper counter setpoint to 10:
– Use
ú í
to move the cursor onto the tens digit.
– Use
ÍÚ
to modify the value of the digit.
X
Press
OK
to save the value and
ESC
to return to the circuit
diagram.
X
Enter the circuit diagram up to contact
T 01
of the timing
relay. Set the parameters for
T
01
.
I 05---------------------------Ä C 01C
I 06---------------------------Ä C 01RE
C 01---------------------------Ä T 01EN
T 01Q1-------------------------Ä Q 01
J
If the cursor is on the contact number, EZD will call up the
parameter display when you press
OK
.
C 01
+
>SH +10
>SL
>SV
J
EZD has specific parameter displays for the function blocks.
The meaning of these parameters is explained under each
function block type.
