Screen overview
For more information visit:
www.EatonElectrical.com
MN05013005E
323
Screen 5:
Screen 5 is basically the same as screen 4 except that the
Invisible function has been replaced with Flash as the Display
change function. When input I2 = 1 (make contact bit logic),
the message text can be made to flash.
Figure 175: Message text flashing
Screen 6:
Screen 6 is basically the same as screen 5 except that
Inverted was selected for the Display change function. When
input I2 = 1 (make contact bit logic), the message text in this
screen can thus be inverted.
Figure 176: Message text inverted
Screen 7:
Screen 7 is basically the same as screen 6 except that the
inverted display is controlled by timing relay T07
(asynchronous clock pulse). The text flashes in the display at
different pulse and pause times.
Figure 177: Message text inverted flashing
I2 not actuated
I2 actuated
I2 not actuated
I2 actuated
flashing
via I2!
Q2 ON
flashing
via I2!
Q2 OFF
invert
via I2!
Q2 ON
invert
via I2!
Q2 OFF
flashing
via timer
Q2 ON
flashing
via timer
Q2 ON