For more information visit:
www.EatonElectrical.com
Commissioning
MN05013005E
104
The menu BAUDRATE: 9600B will appear. The two baud
rates are for 9600 or 19200 baud. Select the baud rate that
your connection will support. Baud rate selection.
X
Press the
OK
button.
Select 19200 baud as the baud rate.
X
Press the
Í
or
Ú
button.
X
Press the
OK
button.
Switch on the COM connection.
X
Press the
Ú
button.
X
Press the
OK
button.
The tick on the COM-LINK menu item indicates that COM-
LINK has been selected.
No tick means that COM-LINK has not been selected.
X
Select the REMOTE MARKER menu item.
The following selection will only be displayed if the COM-LINK
menu item has been ticked.
BAUDRATE: 9600B
COM-LINK
REMOTE MARKER...
J
Select 19200 baud as the baud rate. Badly laid cables may
give rise to electromagnetic interference. Select 9600 baud
as the baud rate. If this is not satisfactory, the connection
cable must be laid in a different location.
BAUDRATE:
192
00B
COM-LINK
REMOTE MARKER...
J
The COM-LINK must only be switched at the active station.
Two devices with COM-LINK
å
switched on cannot
communicate with each other.
BAUDRATE:19200B
COM-LINK å
REMOTE MARKER...
J
The following applies to the active station:
If you wish to run data transfers between the two devices in
both directions, you must select the marker range on the
active station.
BAUDRATE:19200B
COM-LINK å
REMOTE MARKER...