EZD operation
For more information visit:
www.EatonElectrical.com
MN05013005E
135
Saving and loading programs
EZD provides you with two ways of saving circuit diagrams
externally:
• Saving to a memory card.
• Saving on a PC with EZSoft.
Once they have been saved, programs can be reloaded into
EZD, edited and run.
All program data is saved in EZD. In the event of a power
failure the data will be retained until the next time it is
overwritten or deleted.
Memory card
Each memory card contains a circuit diagram which is
inserted into the EZD interface.
The EZD behaves in the following manner in accordance with
the type and setting.
Requirement:
A valid circuit diagram must be stored on the card.
Variants with display:
X
Go to the CARD menu and load the circuit diagram into the
unit in STOP mode via CARD
J
DEVICE.
Variants without display:
If the circuit diagram on the card is different to the circuit
diagram in the device, the program from the card is loaded as
soon as the power supply is turned on.
EZSoft
EZSoft is a PC program for creating, testing and managing
EZD programs, visualization applications and circuit
diagrams.
Completed programs are exchanged between the PC and
EZD via the connection cable. Once you have transferred a
circuit diagram, you can start EZD straight from your PC.