Mounting
For more information visit:
www.EatonElectrical.com
MN05013005E
37
Figure 13: Screw fastening the display/operating unit
X
Screw fasten the display/operating unit.
The tightening torque must be between 1.2 and 2 Nm
(10.6 and 17.6 in.lb)
Figure 14: Mounting the display/operating unit, front mounting
Use the combination box spanner with the designation
M22-MS.
2
x
J
Ensure that the correct torque is used. If the tightening
torque is too low or high, this may impair the seal.