Terminal mode
For more information visit:
www.EatonElectrical.com
MN05013005E
115
Close Terminal mode.
Press the * button to close the Terminal mode.
X
Press the * button.
This returns you back to your local device.
X
Press the
ESC
button twice.
The Status display of the EZD device is active.
The flashing star at the top right of the display is no longer
present.
The display must be initialized again if the CPU was fitted to it
under live conditions.
X
Press the
DEL
and
ESC
button simultaneously.
This will reinitialize the display.
J
In Terminal mode, the EZD device makes its display and
operating unit available to the connected device. Only data
for the display and the status of the buttons is sent via the
connection. This ensures that the local data of the
connected device is not destroyed in the event of a
communication fault.
STATION ID: 2
START MODE
J
The * button cannot be assigned to other tasks if you wish
to use Terminal mode in your application. Use the * button
to change from the visualization to the Status display.
Otherwise the Terminal mode menu cannot be reached.
STATION ID: 2
START MODE
I ..345..89...
I
P-
SA 06:47
ST
Q 2 4
STOP