For more information visit:
www.EatonElectrical.com
Installation
MN05013005E
80
X
Connect the EZ expansion unit via the EZ-LINK-DS plug
connector.
Figure 62: Connecting local expansion units with EZD-CP8..
EZD-CP8..
EZ6..-..-RE..
EZ6..-..-TE..
EZ2…
EZ-LINK-DS
The following electrical separation is implemented between
the power supply/CPU module of the EZD device and the
expansion unit (separation always in local connection of
expansion unit)
• Simple isolation 400 V AC (+10 %)
• Safe isolation 240 V AC (+10 %)
Units may be destroyed if the value 400 V AC +10 % is
exceeded, and may cause the malfunction of the entire
system or machine!
J
EZD power supply/CPU modules and expansion units can
be fed by different DC power supplies.