For more information visit:
www.EatonElectrical.com
Visualization with EZD
MN05013005E
322
Screen 3:
Screen 3 illustrates the control of an enlarged message text
element containing two message texts that are assigned to
the two states of output Q2.
Q2 = 0
J
Message text: Q2 OFF
Q2 = 1
J
Message text: Q2 ON
Figure 173: Message texts using an associated variable
Screen 4:
Screen 4 is basically the same as screen 3 except that it also
includes the Visibility element. The message text can be
made invisible via input I1. The setting for this was made in the
Visibility tab. Make contact bit logic is selected. With break
contact bit logic, the message text element is made visible
when actuating I1.
Figure 174: Hiding a message text
I1 not actuated
I1 actuated
Q2 OFF
Q2 ON
invisible
via I1
Q2 ON
Invisible
via I1