Doosan P185WDOU-T4F (F89) Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 196

Doosan P185WDOU-T4F (F89) Скачать руководство пользователя страница 19

This compressor has been designed and built in accordance with the latest global safety
standards. It has been carefully engineered to eliminate hazards as far as practicable and to
increase operator safety through protective guards and labeling. However, some risks may
remain even after protective measures have been taken. They are called residual risks. On
this compressor, they may include exposure to:

•

Heat, noise, exhaust, and carbon monoxide from the engine.

•

Fire hazards from improper refueling techniques.

•

Fuel and its fumes.

•

Electric shock and/or arc flash.

•

Personal injury from improperly relieving pressure before removing filler plugs/caps,
fittings or covers.

Electrocution or severe electrical shock hazards are present throughout
the compressor any time the engine is running!

To protect yourself and others, make sure you thoroughly read and understand the safety
information presented in this manual before operating the compressor.

This compressor is built with user safety in mind; however, like any device it can present
serious hazards if improperly operated and serviced. Follow instructions carefully! Should
questions arise during operation or service of this equipment, contact Doosan Infracore
Portable Power.

19

«
...
17
18
19
20
21
...
»

Содержание P185WDOU-T4F (F89)





































































































































































































Отзывы:

Нет отзывов