Doosan P185WDOU-T4F (F89), Руководство по эксплуатации и обслуживанию

Страница: 112 / 196

Engine Operation
Replenishment of Coolant
Do NOT let foreign substances flow into the engine when replenishing
coolant.
If the reservoir cap is opened while the engine is hot, hot water will spurt
out and may cause serious burns. Open the reservoir cap after making
sure that the engine has been fully cooled.
Mark and separately manage the containers for storing coolant from
beverage containers for avoiding confusion. See a doctor immediately
in case of drinking coolant.
If the coolant level of the supplementary tank is below the lower limit, replenish the coolant
as follows:
1. Remove the supplementary tank cap.
2. Replenish coolant until level is between the upper and lower limit of the supplementary
tank.
3. Install the supplementary tank cap.
If there is no coolant in the supplementary tank, replenish the coolant as follows:
1. Remove the reservoir cap while the engine and radiator are cold.
2. Replenish coolant up to the inlet of the radiator.
3. After starting the engine let the coolant circulate sufficiently and check the coolant
level. If there is insufficient coolant, replenish more.
4. Remove the supplementary tank cap.
5. Replenish coolant until its level is between the upper and lower limit of the
supplementary tank.
6. Install the supplementary tank cap.
112