Doosan P185WDOU-T4F (F89), Руководство по эксплуатации и обслуживанию

Страница: 135 / 196

Maintenance
Electrical System
Disconnect the battery cables before performing any maintenance or
service.
Check the security of electrical devices and sensors to ensure terminals and/or connectors
are tight. Loose connections may cause local hot spot oxidation.
When removing connectors from electrical devices and sensors, inspect the terminals to
ensure they have electrical grease on them. If electrical grease is not present or very minimal,
add a small amount of Doosan Part No. 22409114 Electrical Grease to the terminals.
Dirty and/or corroded electrical terminals can be cleaned using electrical contact cleaner.
Inspect the components and wiring for signs of overheating (i.e., discoloration, charring of
cables, deformation of parts, acrid smells, and blistered paint).
Battery
Refer to the Preventive Maintenance Schedule in this manual for recommended servicing
intervals.
Keep the battery terminals and cable clamps clean and lightly coated with petroleum jelly to
prevent corrosion. The battery restraint should be kept tight enough to prevent the battery
from moving.
Pressure System
Regularly, it is necessary to inspect the external surfaces of the pressure system, from the
airend through to the Service Valve(s) including hoses, tubes, tube fittings, and the separator
tank for visible signs of impact damage, excessive corrosion, abrasion, tightness, and
chafing. Any suspect parts should be replaced before the compressor is put back into service.
Tire Pressure
A weekly inspection is recommended. Tires that have cuts or cracks or little tread should be
repaired or replaced. Monthly check the wheel lug nuts for tightness. Refer to the General
Data in this manual and Refer to the Preventive Maintenance Schedule in this manual for
recommended servicing intervals.
135