Doosan P185WDOU-T4F (F89), Руководство по эксплуатации и обслуживанию

Страница: 103 / 196

Engine Operation
Refer to the Preventive Maintenance Schedule in this manual for recommended servicing
intervals. Perform the following procedure below as follows:
Oil in the filter may run down while detaching the oil filter. Be careful
not to contaminate the other parts by using a cloth when detaching the
filter. After replacing the oil filter, wipe clean any other parts which the
oil has touched.
Procedure:
1. Locate the engine oil drain plug. The drain plug allows the oil to drain out of the pan.
2. Position a container, such as an approved oil catch pan, under the engine oil drain
plug. Make sure the catch pan is large enough to hold the volume of oil expected to
drain out of the engine. (Refer to engine owner’s manual).
3. Loosen the engine oil drain plug. Carefully remove the plug by hand, making sure
the catch pan is underneath the plug hole. Oil will flow rapidly from the hole, but
allow several minutes for all old oil to drain out. (Refer to engine owner’s manual for
additional information.)
CAUTION: OIL MAY BE HOT! (See Figure 4-4).
4. Remove oil fill cap.
5. Wipe the engine oil threads and engine oil drain plug with a rag, and visually inspect
the condition of the oil pan and oil drain plug threads and gasket. Replace drain plug if
you have any concerns about the condition of the plug. Replace the drain plug gasket
if needed. Once the oil is finished draining, reinstall the oil drain plug and tighten.
6. Drain plug at the torque of 3.0 kgf•m to the manufacturer-specified. (Refer to engine
owner’s manual.) (See Figure 4-4).
103