Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 48

Страница: 48 / 703

If the inside or outside door handles are used while the

power sliding side door is activated, the power sliding

door feature will be canceled and will go into manual

mode.
To avoid unintentional operation of the power sliding

doors from the rear seats, push the power sliding door

master lock button, located in the overhead console, to

disable the switches and handles for the rear seat passen-

gers.

NOTE:

•

The power sliding side door switches will not open the

power sliding door if the shift lever is in gear or the

vehicle speed is above 0 mph (0 km/h). To close the

power sliding door with the shift lever in gear and

vehicle speed at 0 mph (0 km/h), the brake must be

pushed.

•

If anything obstructs the power sliding side door while

it is closing or opening, the door will automatically

reverse to the closed or open position, provided it

meets sufficient resistance.

•

If the power sliding side door is not in the full open or

close position, it will fully open when a power sliding

Power Sliding Door Switch

46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды