Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 277

Страница: 277 / 703

WARNING!

To avoid serious injury or death:

•

Do not insert any objects into the receptacles.

•

Do not touch with wet hands.

•

Close the lid when not in use.

•

If this outlet is mishandled, it may cause an electric
shock and failure.

CUPHOLDERS

There are cupholders located throughout the interior. All

liners are removable for cleaning. Pull the flexible liner

from the cupholder drawer or tray starting at one edge

for easy removal. Refer to “Cleaning The Instrument

Panel Cupholders” in “Maintaining Your Vehicle” for

further information.

Instrument Panel Cupholders

The instrument panel cupholders are located in a pull-out

drawer just above the lower storage bin.

Pull the drawer out firmly until it stops, and place the

container to be held in either one of the cupholder wells.

The cupholders are designed to accommodate a wide

Front Cupholders

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 275

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды