Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 552

Страница: 552 / 703

NOTE:

The trailer tongue weight must be considered as

part of the combined weight of occupants and cargo, and

should never exceed the weight referenced on the Tire

and Loading Information placard. Refer to “Tire Safety

Information” in “Starting and Operating” for further

information.

Trailer And Tongue Weight

Always load a trailer with 60% to 65% of the weight in

the front of the trailer. This places 10% to 15% of the

Gross Trailer Weight (GTW) on the tow hitch of your

vehicle. Loads balanced over the wheels or heavier in the

rear can cause the trailer to sway

severely

side to side

which will cause loss of control of the vehicle and trailer.

Failure to load trailers heavier in front is the cause of

many trailer collisions.
Never exceed the maximum tongue weight stamped on

your bumper or trailer hitch.

Consider the following items when computing the

weight on the rear axle of the vehicle:

•

The tongue weight of the trailer.

•

The weight of any other type of cargo or equipment

put in or on your vehicle.

•

The weight of the driver and all passengers.

550 STARTING AND OPERATING

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды