Dodge 2015 GRAND CARAVAN Скачать руководство пользователя страница 433

Страница: 433 / 703

The button located in the center of the left-hand switch

will tune to the next preset station that you have pro-

grammed in the radio preset push-button.

CD Player

Pushing the top of the switch once will go to the next

track on the CD. Pushing the bottom of the switch once

will go to the beginning of the current track, or to the

beginning of the previous track if it is within one second

after the current track begins to play.
If you push the switch up or down twice it plays the

second track; three times, it will play the third, etc.
The button in the center of the left-hand switch has no

function in this mode.

CD/DVD/Blu-ray™ Disc MAINTENANCE

To keep a CD/DVD/Blu-ray™ Disc in good condition,

take the following precautions:
1. Handle the disc by its edge; avoid touching the

surface.

2. If the disc is stained, clean the surface with a soft cloth,

wiping from center to edge.

3. Do not apply paper or tape to the disc; avoid scratch-

ing the disc.

4. Do not use solvents such as benzene, thinner, cleaners,

or anti-static sprays.

5. Store the disc in its case after playing.
6. Do not expose the disc to direct sunlight.
7. Do not store the disc where temperatures may become

too high.

UNDERSTANDING YOUR INSTRUMENT PANEL 431

Содержание 2015 GRAND CARAVAN
































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды

Dodge 2015 GRAND CARAVAN, Руководство пользователя

Результаты поиска

Содержание 2015 GRAND CARAVAN

Отзывы:

Похожие инструкции для 2015 GRAND CARAVAN

Бренды по названию

Популярные бренды